REQUEST SAMPLES
clear-PEP® UV satin is a semi-transparent, slightly textured, colored UV-protected PMMA/Acrylic facing sheet. UV satin panels are suitable for interior applications and exterior vertical applications (not horizontal). If a satin surface is required for horizontal applications, we would achieve the finish using specially formulated UV coatings and the base product panel.
Exterior: Vertical applications only – facades, sun screens, signage, etc.
Interior: Interior finishes, wall / ceiling, partitions, doors, shop & exhibition construction, stage construction, artistic applications, furniture, lighting design
Format | Length [mm/inches] | Width [mm/inches] | Thickness [mm/inches] |
---|---|---|---|
Standard | 3020/118.8 | 1000/39.3 | 19/0.75 |
Special Dimensions*/** | max 7800/307 or 25.5′ | max 2020/79.5 | max 80/3.14 |
Cut to size | 2/-2 to 0.08/-0.08 | 1/-2 to 0.04/-0.08 | 0/-1 to 0/-0.04 |
*on request – minimum orders apply for special sizes
**all panels over 3020 x 1050 require a core joint
Coefficient of thermal expansion acc. to DIN 537522-A [1/K] |
---|
7.5 x 105 |
Service temperature [oC/F] |
-30 to +80 / -22 to 176 |
G Value (total energy transmission value) based on solar angle |
0.62 (0o), 0.58 (30o), 0.55 (45o), 0.43 (60o) |
Thickness [mm/inches] |
Weight per unit area [kg/m2/lbs/sqft] |
Thermal insulation U-value [W/M2K] |
Sound insulation RW [DB] |
Modulus in Elasticity [N/MM 2] |
---|---|---|---|---|
19/0.74 | 10.8/2.21 | 2.8 | 26 | 1450 |
30/1.18 | 12/2.46 | 2.4 | 27 | 800 |
40/1.57 | 12/2.46 | 2.1 | 27 | 600 |
60/2.36 | 13.2/2.7 | 1.7 | 28 | 510 |
80/3.14 | 13.2/2.7 | 1.4 | 28 | 150 |
*per 1m panel width
Deflection* caused by self-weight
Product | Thickness | Support distance 600mm [23.26″] [mm / inch] |
Support distance 1000mm [39.37″] [mm / inch] |
Support distance 1200mm [47.24″] [mm / inch] |
---|---|---|---|---|
clear-PEP UV PC | 19mm (0.75″) | 0.2 / 0.0082 | 1.4 / 0.0574 | 2.9 / 0.1189 |
clear-PEP UV PC | 25mm (0.98″) | 0.1 / 0.0041 | 0.8 / 0.0328 | 1.6 / 0.0656 |
clear-PEP UV PC | 30mm (1.18″) | 0.1 / 0.0041 | 0.6 / 0.0246 | 1.2 / 0.0492 |
clear-PEP UV PC | 35mm (1.38″) | 0.1 / 0.0041 | 0.4 / 0.0164 | 0.8 / 0.0328 |
clear-PEP UV PC | 40mm (1.57″) | 0.1 / 0.0041 | 0.3 / 0.0123 | 0.6 / 0.0246 |
*… supported at two edges
Deflection* under a load of 1000N/m2 (20.88 psf)
Product | Thickness | Support distance 600mm [23.26″] [mm / inch] |
Support distance 1000mm [39.37″] [mm / inch] |
Support distance 1200mm [47.24″] [mm / inch] |
---|---|---|---|---|
clear-PEP UV PC | 19mm (0.75″) | 2.4 / 0.0984 | 18.0 / 0.7377 | 37.0 / 1.5164 |
clear-PEP UV PC | 25mm (0.98″) | 1.3 / 0.0533 | 9.7 / 0.3975 | 20.0 / 0.8197 |
clear-PEP UV PC | 30mm (1.18″) | 0.9 / 0.0369 | 6.6 / 0.2705 | 13.5 / 0.5533 |
clear-PEP UV PC | 35mm (1.38″) | 0.6 / 0.0246 | 4.7 / 0.1926 | 9.6 / 0.3934 |
clear-PEP UV PC | 40mm (1.57″) | 0.5 / 0.0205 | 3.5 / 0.1434 | 7.2 / 0.2951 |
*… supported at two edges
Fire Classification | ASTM D-2843 Smoke Density [%] |
ASTM D-635 Burning Rate [inches] |
ASTM D-1929 Self Ignition Temp. [oF] |
ASTM E648-17/NFPA253 WATTS/CM2 |
* ASTM E-84 Flame Spread Index |
---|---|---|---|---|---|
C1/CC1 | 8.2% | 1.14″ | 853 | >1.10 | 50 |
* ASTM-E84 – 19a “Standard Method of Test for Surface Burning Characteristics of Building Materials”.
The foregoing test procedure is comparable to UL 723, ANSI/NFPA No. 255, and UBC No. 8-1.